Easy Way To Install Board and Batten Siding
Board and batten siding – Shout out to all the people who love to build and decorate their own houses themselves! Are you one of them? If yes, have you figured out the easy way to install your own board and batten siding? For you people who are still wondering why board and batten siding, here is the answer for you. Board and batten siding comes to protect your home or out buildings.
Board And Batten Siding Installation
This is one of the most popular choices that people usually choose once they build their own houses. Do you find it necessary as well for your home? It is best to at least know how to install board and batten siding easily so that you do not need to spend a lot of money to pay for people to install the board and batten siding. Moreover, it is fun for you to do it on your free time. So, let’s get started!
The first thing that you need to prepare is the design of your board and batten siding. Usually, the most common design that people use is the horizontal type. For this design, there should be only for feet apart for the stringers so that it can hold the board and batten properly. And for the board, it should be 1 inch, 6 to 10 inches wide. You will not want to have an overly wide board and batten siding, right? So it would be better for you to cut all the woods that you have first before starting to go to the next step.
Now, you must be a bit confuse on how you should stick all the cut woods together nicely. There are two options that you can choose. The first is to nail the woods and the second is to screw the woods. The first thing that you need to consider is what type of the woods that you have? If it is a strong, hard and solid woods, you can nail the woods without needing to bend the nails.
On the other hand, if you have such a soft woods, it would be much better if you choose screw the woods. if you have already chosen which one that you are going to use, for the bottom side, pre-drill the holes. Use a 4 feet carpenter’s level to keep the boards up straight. When you put the boards up, you need to be extra careful to the growth rings. The boards usually tries to cup as they dry.
Next, nail or screw the board about 1 inch from the edge and let the rest of the edges to float. By nailing the batten, it has the ability to hold the other edges. For the batten, the thickness should be one inch and two inches wideness. For the best result, you are suggested to nail the batten six months after the boards are installed. To seals up the gap between the stringer and the edges of the boards, you can screw or nail the batten on its gap. Good luck, people for your own board and batten siding!